Hello, welcome to Guangdong GuangHe Painting Equipment Co., Ltd. official website! Chinese  |  English  |  Collect   |  feedback
 
  SERVICE
  Trend
  Practice
  Crafts
  Area
  Maintain
  Feature
  Elements
  Contact us
  Guangdong GuangHe Painting Equipment Co., Ltd.
Miss li: 16698528912 < br / > Address£ºOpposite to xianzigang bus stop, Shiman Town, Nanhai District, Foshan City, Guangdong Province
Site£ºwww.gh0757.com
  Crafts Your position - Home - Service
 
Painting equipment process layout design quality, the use of coating production lines is critical. If the coating equipment process layout properly, even though the production of a single device, no matter how, the entire coating line is not good to use.
Painting equipment process layout now common typical errors are listed below:
1, yield less than the design of the Programme: Some design does not consider painting equipment hanging way,
Painting equipment

Painting equipment

Does not consider hanging pitch, irrespective of the downhill, turn the interference level, without regard to the rejection rate of production time, painting equipment utilization, product peak production capacity. Resulting in production to reach the design program.

2, coating equipment processing time is not enough: some design in order to reduce the cost by reducing the process time to achieve their goals. Common, such as: pre-treatment coating production line transition time is not enough, resulting in a string fluid; heating time is not considered curable, resulting in poor curing; painting leveling time is not enough, not enough to cause the film leveling; insufficient cooling after curing, painting (or The next item) workpiece overheating.

3, transmission equipment poorly designed: transportation There are many ways the work, improper design, production capacity, process technology, the upper and lower parts will have adverse consequences. Common are hanging chain conveyor, its load capacity, towing capacity and interference need to calculate the drawing. The speed of the equipment chain should also have the corresponding requirements. Painting equipment chain stability, synchronization is also required.

4, coating equipment selection inappropriate: due to the different product requirements, equipment selection are different, and a variety of coating equipment has its advantages and its disadvantages. The design can not explain to the user after manufacture was found satisfactory. For example, dusting bake with air curtain heat, the workpiece cleanliness requirements are not installed purification equipment. Such errors are painting equipment process layout of the most common mistakes.
  Coating line   Painting equipment   Painting equipment   Painting equipment   Painting equipment   Painting equipment   Painting equipment   Quartz Stone
HOME
ABOUT US
PRODUCT
NEWS
Downloads
RECRUITMENT
FEEDBACK
CONTACT US
English
Copyright£ºGuangdong GuangHe Painting Equipment Co., Ltd.     Technology£º360zyh
Miss li: 16698528912 < br / > Address£ºOpposite to xianzigang bus stop, Shiman Town, Nanhai District, Foshan City, Guangdong Province     Site£ºwww.gh0757.com